High-Power Campfire Fan — Brushless Turbo Technology. MistAirHome Direct Manufacturer.
Customer Service Hotline:
+8613261677119
High-Power Campfire Fan — Brushless Turbo Technology. MistAirHome Direct Manufacturer.+8613261677119
TL;DR - The Mistairhome WL-AH06O (PLUS) holds 520 mL and mists 53 mL per hour or 25.4 mL per hour, which is 9.8 hours and 20.5 hours per fill; the oil side takes 5.3 mL and runs 17.7 hours per fill at 0.3 mL per hour; it covers 19 sq m (204 sq ft) at a 2.6 m ceiling and measures 26.8 dB on the high step and 24.3 dB on the sleep step; it draws 3.4 W and takes its supply from USB-C 5V/2A, runs from a monitor hub or a phone charger; oil tray behind a flip door on the back, filled without moving the unit; the humidistat holds target band 30 to 75 percent in 5 percent steps, held within 3 percent over Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing, and desk schedule by weekday, with an oil level reminder rather than a guess, voice runs through Amazon Alexa and Google Home for on off, mist step and the burst mode; no internal cell on this build; it weighs 537 g and measures 15.2 x 15.2 x 23.6 cm, and ships documented to CE / RoHS / FCC standards for import into Malaysia. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Office Aroma Humidifier for Productivity category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common oil path and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
The scent path is the part that separates this range from a humidifier with a few drops poured into the tank. The oil sits in its own tray or pad above the water line, on seals rated for citrus and resin blends, so the disc, the tank and the gasket never contact the oil. That is what keeps a scented unit serviceable for years rather than seasons, and it is the first thing we ask a buyer to check on a competitor sample.
Full specification of WL-AH06O-PLUS:
| Misting method | Ultrasonic piezo disc at 1.7 MHz under a diffuser cone that breaks the plume early |
| Tank capacity | 520 mL |
| Mist output on the high step | 53 mL per hour |
| Mist output on the low step | 25.4 mL per hour |
| Run time per fill on the high step | 9.8 hours |
| Run time per fill on the low step | 20.5 hours |
| Coverage area | 19 sq m (204 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 26.8 dB |
| Noise at 1 m on the sleep step | 24.3 dB |
| Scent delivery method | Oil tray behind a flip door on the back, filled without moving the unit |
| Oil tray capacity | 5.3 mL |
| Oil contact parts | PP tray with a Viton seal, rated for peppermint and eucalyptus |
| Scent intensity control | Three intensity steps with a 30 minute burst mode for meeting rooms |
| Scent run time per tray fill | 17.7 hours |
| Oil use per hour | 0.3 mL per hour |
| Water type | Tap or distilled; a demineralisation cartridge drops into the filler neck |
| Mineral dust handling | Cartridge bay in the neck, and the cone keeps any residue off the desk |
| Fill method | Top fill through a 62 mm opening, no need to lift the tank off |
| Battery pack | Not fitted, runs from the USB-C supply |
| Cordless run time | Not applicable, mains or USB powered |
| Charge time | Not applicable, no internal cell |
| Power input | USB-C 5V/2A, runs from a monitor hub or a phone charger |
| Rated power on the high step | 3.4 W |
| Control interface | Touch panel with three mist steps, scent step, display dim and a timer |
| Network link | Wi-Fi 2.4 GHz with Bluetooth fallback for first pairing |
| App platform | desk schedule by weekday, with an oil level reminder rather than a guess |
| Voice assistant support | Amazon Alexa and Google Home for on off, mist step and the burst mode |
| Humidistat range and accuracy | target band 30 to 75 percent in 5 percent steps, held within 3 percent |
| Scheduling | Seven day schedule with four events per day and power-failure memory |
| Night light | Soft underside glow in seven colours, dimmable to off for shared desks |
| Protection | Dry-run shut-off, tilt switch, overcurrent limit, sealed base gasket |
| Dimensions | 15.2 x 15.2 x 23.6 cm |
| Weight | 537 g |
| Warranty | 18 months |
| Shipped kit | Plus build, + 10 mL starter oil set + hard carry case + wick and cartridge starter set + gift box + funnel |
| Units per master carton | 18 |
| Lead time | 25-35 days |
Three things move this category in Malaysia: heated or cooled air that dries a room faster than people expect, a home fragrance habit that has moved from candles to appliances, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and gift supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
Returns in the Office Aroma Humidifier for Productivity category cluster around three causes: mineral dust on hard water, a scent that is stronger than the room wants, and a tray that cannot be cleaned. All three are answered at quotation stage rather than after arrival. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the oil handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Malaysia through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and oil declarations listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-AH06O (PLUS) packs 18 units to a carton, carries 18 months of warranty cover and a 25-35-day stated lead time, and draws 3.4 W on the high step.
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the oil side, and it is the one nobody quotes. Scent is consumed at a rate, not by a setting, and across this range that rate sits between roughly 0.22 and 0.35 mL per hour depending on the step and the disc. Divide the tray capacity by that rate and a buyer knows how many nights a fill of oil lasts, which is the figure that decides whether the product is a pleasure or a chore. Ours is published per model and per step.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, oil tray seal integrity after a 72 hour soak in a citrus blend, and dry-run shut-off function on an empty tank. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
Three deployment records from the Office Aroma Humidifier for Productivity programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Deployment: A 14th-floor apartment in a 1990s block, heating season from November, windows never opened in winter
Timing: Two winters from November 2024
Japanese buyers check the decibel figure before anything else, and this buyer arrived with a sound meter. The unit that went in is the quiet chassis at 22 dB on the sleep step, and it was placed on a tatami mat rather than on the wooden floor, which took another couple of decibels off the reading by removing the panel resonance. Scent was the last question asked, and the buyer chose the lowest step available, which is the pattern across every residential order we have shipped to Japan.
Deployment: A guesthouse in a 1900s semi-detached house, south-easterly wind in summer, no central heating
Timing: One year from September 2024
The wind here is the same factor it was in Malmö, and it shows up as a tank that empties faster than the arithmetic predicts on the windward side of the house. The guesthouse's eight rooms are split four and four between the two sides, and the reorder simply put larger tanks on the seaward four. The housekeeper's contribution was the useful one: she wanted a fill she could do with a jug in the room rather than a trip to the kitchen.
Deployment: A citrus packing cooperative with a visitor room and a small shop attached to the packing floor
Timing: Eight months from September 2025
This is the case that changed how we specify seals. Local citrus oil is cheaper here than water, and the cooperative put it in everything - and citrus oil crazes bare ABS within a season. The unit that survived has a fluorinated seal and a PP tray, and it is the only one on the site that has not needed a lid replaced. Any exporter selling into a market with a strong local citrus habit should assume the oil will be locally sourced and specify for it.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the oil could be refilled inside the round, and whether anyone complained about the smell or the dust. Those are the questions we ask before quoting. The WL-AH06O (PLUS) packs 18 units to a carton, carries 18 months of warranty cover and a 25-35-day stated lead time, and draws 3.4 W on the high step.
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC03-WORKDESK | A single workstation with a laptop, a phone and a shared air supply | Moisture at the desk, and no smell a neighbour can object to | A compact chassis on the low step, placed upwind of the face rather than beside the keyboard, with the scent step left off in shared space. |
| SC04-RECEPTION | Entrance desks and waiting areas judged in the first ten seconds | A consistent first impression that does not depend on who is on shift | A burst mode runs the scent for thirty minutes either side of opening, then drops to a maintenance step nobody has to remember. |
| SC05-TREATMENT | Rooms booked back to back, where the scent has to leave before the next client | A scent that clears between appointments rather than building up | Scent and mist run on separate timers, so the room can be scented for a session and cleared with plain mist before the next client arrives. |
| SC06-GUESTROOM | Turned around inside a fixed housekeeping window, twelve rooms to a round | A fill and a scent refresh inside the minutes the room already gets | Top fill from a jug at the bedside and a tray filled without removing the lid, so both tasks sit inside the existing round rather than adding to it. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
Three costs dominate ownership of this product and only one of them is on the invoice. The first is the appliance. The second is the consumable - cartridges, pads, replacement discs and, on many programmes, the oil itself - which is where the repeat revenue sits for every distributor we work with and which should be planned as a line item rather than bought occasionally. The third is staff time, because a tank that cannot be cleaned quickly is a tank that does not get cleaned.
A factory programme attacks all three. Consumables ship in the same container as the appliances, which is the cheapest way to buy them. Cleaning intervals are published rather than left to guesswork, and the tank geometry is chosen so the published interval is actually achievable by one person on a round.
What we do not offer is the lowest unit price in the market. A cheaper unit in this category usually buys a narrower tank neck, a disc of unspecified origin, seals that swell on contact with citrus oil and no spares path, and every one of those shows up later as a cost somewhere else. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
Compliance in this category splits into three burdens that buyers often treat as one. The first is electrical and appliance safety: the CE technical file, an EMC test report and the IEC 60335-1 household appliance safety report, which is the set that gets a unit onto a shelf in Europe. The second applies only where a cell is fitted: a UN38.3 test report with an IEC 62133 cell report and an MSDS, which is the set that gets a unit onto a vessel.
The third is the oil, and it is the one that catches importers out. Where we ship oil with the unit we provide an IFRA-aligned statement of conformity, an allergen declaration listing the 26 declarable substances where they are present, an MSDS per blend and a flash point figure. That last number decides how the consignment is classified for transport: a blend below 60 C ships as a UN1266 Class 3 flammable liquid with the corresponding documentation and packaging, and a buyer who discovers this at the booking desk discovers it too late.
RoHS and REACH declarations cover the appliance materials, and because the oil contacts specific parts we also issue a material declaration for the tray, the seal and the pad rather than for the unit as a whole. Where a market needs a local approval, we issue against PSE, KC or RCM at the same time as the CE work rather than after it, because the test evidence largely overlaps. On the WL-AH06O (PLUS) the figures worth carrying into the next order are the 520 mL tank, the 17.7 hours of scent per oil fill, and the 24.3 dB reading on the sleep step.
Three numbers decide whether this line works for a distributor, and the first one is not the unit price. Freight is the variable most buyers undercount: at 0.125 cubic metres per master carton of 18 units, a 20 ft container takes about 169 cartons, or roughly 3,042 units, and a 40 ft container about 373 cartons, or roughly 6,714 units. Those are volume figures before palletisation and loading losses, so a buyer should treat them as an upper bound.
The second number is the consumable. A misting disc is a wearing part with a service life measured in months of continuous use rather than years, and hard water shortens it considerably. Pads and cartridges sit on top of that, and where the programme ships oil, the oil is the fastest-moving line of the three. We suggest one spare disc per twenty units, one cartridge per unit where the water is hard, and a pad set per unit per year, and all of them ride in the same container as the appliances.
The third is the cost of a return. In this category returns split roughly evenly between mineral dust and a scent the room did not want, and both are prevented at specification stage rather than by a better returns process. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
What is the minimum order quantity for a first aroma humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-AH06O-PLUS.
Can essential oil go in the water tank, or does it have its own tray?
It has its own tray, and that is the point of the design. The oil sits above the water line on pp tray with a viton seal, rated for peppermint and eucalyptus, so the disc, the tank and the gasket never contact it. Pouring oil into the tank is the common construction and it is the reason cheap units fail in the second season: the oil films the disc and swells the seal. On WL-AH06O the tray is 5.3 mL and lifts out for washing.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. The answer is a demineralisation cartridge in the tank, which is a consumable with a real working life. This unit is specified as cartridge bay in the neck, and the cone keeps any residue off the desk.
Which compliance and oil documents ship with an aroma humidifier order?
The standard appliance file set is the CE technical file, RoHS and REACH declarations, an EMC test report and the IEC 60335-1 household appliance safety report, plus a UN38.3 test report with an IEC 62133 cell report and MSDS on any build carrying a cell. Where oil ships with the unit we add an IFRA-aligned statement of conformity, an allergen declaration, an MSDS per blend and a flash point figure for transport classification. Certificates are issued against WL-AH06O, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language, the accessory kit and, on the Plus build, the oil set itself. Most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How much oil does a unit use, and how often does the tray need filling?
Published per model rather than left to guesswork. This unit holds 5.3 mL in the tray and uses 0.3 mL per hour on the step quoted, which works out at 17.7 hours of scent per fill. In a bedroom that is several nights per fill on the low step; in a reception area running all day it is a midweek top-up, and the three intensity steps with a 30 minute burst mode for meeting rooms let the site set how much of that dose the room actually gets.
What warranty and spares support do you provide?
18 months against manufacturing defect on WL-AH06O. Misting discs, pads, cartridges, trays and seals are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard, plus a pad set per unit per year on scented programmes. On Malaysia shipments the parts travel inside the same container as the appliances, which avoids a second freight booking and the paperwork that comes with it.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 25-35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Where an oil set ships inside the retail box, the transport classification adds a step at booking.
The programme suits any buyer who has to answer for the product after it is sold, which in practice means everyone except the pure spot trader. A distributor carrying a range needs to know which chassis to put in front of which customer, and the answer is usually decided by water hardness, by who refills the tank, and by how much scent the room will accept.
Hospitality buyers need a fill interval that fits a housekeeping round. Clinical and childcare buyers need a material declaration for every oil contact part and a light that can be turned fully off. Retail and fragrance buyers need a tray they can demonstrate in front of a customer in under a minute. Facilities buyers need one unit per occupied room rather than one per floor, and they need the reasoning written down so it survives staff turnover.
What all of them have in common is that they are specifying against a room and a routine rather than against a specification sheet, which is why we ask about the site before we quote the unit. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
First orders go wrong in two predictable places, and both are administrative. The first is documentation raised against the wrong model code, which stops a container at the destination for a reason that has nothing to do with the product. The second is a packing list decided after production begins, which forces either a second shipment or a compromise on the spares - and, in this category, a compromise on the oil.
The sequence that avoids both is short. Agree the specification, the destination list and the oil list; evaluate a sample on that specification; confirm the packing list including consumables; then release production against a stated lead time written on the proforma invoice.
For a buyer new to the category we also suggest a mixed container across two or three SKUs rather than a single-SKU container, because the sell-through data from one mixed shipment is worth more than any forecast either side can produce in advance. For this configuration that means 25.4 mL per hour at 24.3 dB, holding 20.5 hours per fill and 17.7 hours of scent across a 19 sq m (204 sq ft) room.
Two things decide whether this product works, and neither is on the box: whether the tank lasts the interval the site can actually service, and whether the scent level is one the room will accept. Get those two right and the rest of the specification rarely matters.
Everything else on this page exists to make those two decisions possible before money moves - the figures by model rather than by marketing tier, the measurement conditions stated next to the decibel, the oil rate stated per hour, and the honest statement of where the answer depends on the room.
Enquiries are welcome from anyone supplying this category at volume, whether as an importer, a distributor, a brand owner, a fragrance or gift company, a facilities or hospitality group, or a cross-border seller. Samples and the full documentation set are available on request. The WL-AH06O (PLUS) packs 18 units to a carton, carries 18 months of warranty cover and a 25-35-day stated lead time, and draws 3.4 W on the high step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 30, 2026
Data sources: in-house factory testing + misting disc and oil tray specifications + certification and oil declaration files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
